|
FEATURES:
► OBD II form: easy to operate
► LED display: easy to know
► MIS-polarity protection
► Low battery capacity alarm
► Safety power back for you
► Power: 1 × DC 9V battery
(buckle + plug type)
not included
► +/- clip + plug adaptor lead
INSTRUCTIONS:
1.Remove the key.
2.Connect PowerBackup to the
OBDII connector on the vehicle.
3.Go step 4 after first green light.
*It is bad connection or unavailable
detection when you can't see the
first green light.
4.Connect spare power (97 or 12V
battery are both available)
*12V battery is recommended.
5.Make sure there are 2 green lights,
the red light means the capacity of
spare power is not enough.
6.Close all doors.
7.Replace the battery.
PACKING:
► Double blister
|